Air Shower

• High velocity shower jets in excess of 25m/s ensure efficient scrubbing action to remove particulate matter.

• Operating modes can be programmed in the field.

• Control panel supervises all functions.

• HEPA filter, filtration achieves > 99.99% typical efficiency at 0.3 micron particles.

• A disposable pre-filter G4 extends the life of the main filter.

• An emergency stop button is mounted on sides of the shower.

• Auto-Inductive when people come into the booth and the air nozzle begin to work.

• Permanently lubricated direct drive centrifugal blowers are used in conjunction with stainless steel air nozzles.

• Interlock Door System.

Technical Specification  

Power supply: 380V50Hz

Power: 1.5kW

Noise: 65-75dB(A)

Differential pressure gauge: High efficiency display differential pressure gauge

Buzzer: Pressure difference, fault alarm

Button: Power supply (luminous ring visible buttons) with emergency stop

Mist Air Shower

• Mist air shower will form a low flow of wet spray, can contaminate the work clothes of the raw material powder particles coating, continue to condense into large material particles.

• The high speed airflow around the large particle material will prevent the dust particles from contacting the droplets, while the small droplets of the micro particles are easy to condense the dust particles.

• Large particles of material are deposited on the surface of the filter or in the swag collection tray by high-speed airflow. The production of droplets can quickly reach air saturation.

• Moisten all surfaces and form beads on clothing. As time goes on, the water drops gradually increase until they roll off the clothes.

Technical Specification  

Cleanliness: Class D or higher

Temperature: 5°C~40°C

Product schematic diagram

Standard size and parameters

Note: Air shower room and air shower channel not listed in the table can be made according to the customers' requirements